2aa Propolymer Haz-Lo-Streamlight

    2aa Propolymer Haz-Lo

    Product Code: 2aa_propolymer_haz-Lo
    • Clam
    • Black
    • One Size

    Please note this may ship at a later date without the rest of your order

    - +

      SAFETY RATED FLASHLIGHT This feature-laden, safety approved flashlight was designed to meet the stringent requirements of ANSI/UL 913 CAN/CSA C22.2 No. 157-92 intrinsically safe equipment for use in hazardous locations.

      • High-performance, anti-static, thermoplastic material resistant to chemicals and solvents
      • "Captured locking" set screw will not back out -prevents FOD (Foreign Object Debris)
      • Safety measure: Set screw helps to avoid batteries being changed out, or the housing inadvertently being opened in a hazardous environment
      • Set screw goes into a metal tray that evenly distributes pressure to protect the body from over-tightening of the set screw
      • Combination of visual and mechanical polarity protection ensures correct installation of batteries
      • Light designed to not power on if batteries are installed incorrectly
      • 3 "AA" alkaline batteries reduce battery and recycling costs by 25%
      • C4® LEDtechnology - impervious to shock with a 50,000 hour lifetime - provides 120 lumens; runs 6.5 hours
      • Sealed switch design protects it from corrosion caused by battery leakage
      • One body electronic LED module mechanically attached to electronic assembly
      • Smooth parabolic reflector produces a tight beam with optimum peripheral illumination
      • Regulated run time provides consistent performance throughout battery life
      • O-ring sealed, dust-proof, water-tight enclosure
      • IP67 rated for dust-tight and waterproof to 1 meter for 30 minutes; IPX4 for water spray
      • 3 meter impact resistance tested
      • Ergonomically designed for maximum hand comfort
      • 7.00 in. (17.78 cm); 7.5 oz (213 grams) with batteries (included)
      • Limited Lifetime Warranty
      • ATEX-approved for Category 1 (Zone 0) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is present continually or for longer periods. It has a maximum operating temperature of <135 C.
      • Assembled in the USA
      • RoHS compliant

      Currently Viewing